Setting 4 Cycle the generator by stopping the engine then restarting and bringing generator speed back to 1600 engine rpm 5 Note the voltmeter reading and ambient temperature temperature of the air surrounding the regulator
| Book | Page | Context |
|---|---|---|
|
|
Connect a voltmeter from the regulator BAT terminal to ground 3 Operate generator at 1600 engine rpm for at least 15 minutes with the 1 4 ohm resistor in circuit and cover in place ... Setting 4 Cycle the generator by stopping the engine then restarting and bringing generator speed back to 1600 engine rpm 5 Note the voltmeter reading and ambient temperature temperature of the air surrounding the regulator |
|
|
pitch dia wire dia 4 773 Pitch Diameter 4 113 Height Free 11 02 Working 8 11 1600 lbs Height Under Curb Weight 8 03 Capacity at Ground 1019 Deflection Rate at spring |
|
|
generator as required in the cycling procedure without changing engine speed I 4 Operate the generator at 1600 engine rpm for at least 15 minutes to establish operating temperature The regulator cover must |